Peterson's have a range of accessories that are available for purchase with your Peterson Portable Sawmill. These accessories will help increase production and value of the lumber that comes off your mill. If you would like to know prices or order any of these accessoriesemail uswith your order.
|
 |
EZ Dogs
EZ dogs are infinitely adjustable, entirely aluminium, and completely versatile - small logs, big logs, even two logs at once! Spikes are easily replaced, they are light and compact, and offer a totally positive grip to hold your logs completely still.
See full specs and further details. |
 |
Peterson Canthook
Canthooks are used to roll, lift, move, and pivot logs. Made out of mild steel our Canthooks are easier to use and stronger than traditional wooden Canthooks. |
 |
|
Clip on Slabber
Used on large frame models, this bar and chain attachment utilises the mill’s existing 4 stroke motive power to slab logs of up to 5' (1.5m) in width.
|
|
 |
|
Electric Winch
Is easily fitted to most WPF and DWS mills, or used as an upgrade on new mills, the electric winch minimises the time needed for manual winding and for vertical measurements. |
|
 |
|
Re-Tipping Jig
Re-tip your own blades at your milling site with the Peterson Re-Tipping Jig. The Re-Tipping Jig properly aligns your tips with your blade, for a perfect finish. Save time and money on saw doctors by doing it yourself.
|
|
 |
|
Planer Blade
The Planer Blade puts the finishing touches to your dimensional timber. Just mount this blade in place of your standard mill blade and skim over your sawn slab or timber, for planed results.
|
|
 |
MicroKerf Blade and Boss
MicroKerf blades utilise a secondary reinforcing boss for support of the body, and mounts straight onto your existing Peterson blade boss. It is excellent for 1" hardwood boards. It will increase your recovery by 15 - 20% and production by 20 - 30%.
For more information click here. |
|
Remote Area Service Kit
When operating overseas or in remote areas we recommend the purchase of a Remote Area Service Kit. This includes a supply of spares and motor service items to keep a miller going for around 100 hours. |
Blade/Motor Upgrades
On the 6" and 8" four-stroke sawmill models, the cutting heads are designed to be interchangeable, allowing for upgrades between the 6" and 8". All 13hp, 20hp and 24hp Honda motors are also interchangeable, as are 25hp and 27hp Kohler motors. |
Track Extensions
While standard mills cut logs up to 20' (6m), extensions allow for beams of unlimited length. Vertical sizing still remains at the operators end. Logs have been cut longer than 66' (20m) or production doubled by loading and preparing a second log while the first is being sawn at the other end. Track extensions also allow you to run two mills at the same time, with a DWS based at one end, and the WPF or ASM starting from the other. |
